Smart Wireless Remote Control Switch LED Bulb

Warm Tip

• This product only supports RF433MHz, does not support WiFi, does not support smart device control, please pay attention to check the product parameters and use before purchase, thank you for your support, looking forward to your five-star feedback!

Lamp Holder

• Lamp Connector: E27

• Supply voltage: 86-265V 50/60Hz
• Maximum Load: Incandescent lamp, energy-saving lamp, LED lamp (within 100 watts)
• Transmission frequency: 433.92MHz
• Lamp head size: Ф 60mm * 95mm

Round Remote Control

• Operating frequency: 433MHz

• Power supply: 2 x 3V CR2016 batteries (batteries included)
• Material: PVC
• Size: 60mm x 30mm
• Operating voltage: 3V
• Operating current: 12mA
• Transmit power: 10mw
• Modulation Mode: ASK (AM)
• Coding Type: Learning
• Transmission Distance: 20~50 meters

How to Use the Remote Controlle

• Code learning method:
First, press and hold any key you want to paste,then turn on the power switch of the light,and the light flashes once to complete the code learning.

• Method to set whether the incoming call is on or off:
Turn on the power switch of the light, then press and hold the random sticker for 12 seconds within 5 seconds. If the light flashes 2 times, it is set to not turn on the incoall,and if the light flashes 1 time,it is set to turn on the incoming call. Default incoming call light.

• Clear code setting:
First press and hold the power switch that will immediately turn on the light.

Features

• Remote Control: using RF433 remote control lamp holder with wireless button remote control, you can remote control the light bulb, simple and convenient, save time

• Easy to Install: connect the light bulb after installing the light head on it, and then learn the commands of the remote control through the method in the introduction to use it.

• Wide Range of Applications: this product is suitable for the mobility of the elderly, children and pregnant women, without the need for wall switches to control the light bulb, you can install this product in the bedroom, so that you do not need to get out of bed to turn off the lights when you go to sleep, but also this product can be installed in crowded warehouses, no need to walk around to control the on / off

Note:

• This product only supports RF433MHz, does not support WiFi, does not support smart device control, please pay attention to check the product parameters and use before purchase, thank you for your support, looking forward to your five-star feedback!