Time out timer(TOT)
Busy Channel Lockout
Squelch level(0-9 grades)
Auto power saving function
Low power indication/alarm
Frequency-hopping speech encryption
2-pin Kenwood accessory port
Strong Signal Penetration
Covered Area Reached 500,000㎡
Wuhan Wanda Plaza:Full Signal Coverage
Upstair :200㎡ Downstair:180㎡
Xinyu Coffee Shop:Full Signal Coverage
Beijing Beihai Hotel:Full Signal Coverage
Call distance test in city area(2W)
This test was carried out on Bulan Road, Guangzhou, and it is only the calling distance in the urban area. If it is outdoors, the calling distance can reach 3-5km depending on the situation.
You can adjust the power to 0.5W or 2W with the third-party software by programming cable，if you need the third-party software,please contact our customer service.
Voice activate transmission
You can talk with others without using hands.
Note :VOX hands free function only can be activate or deactivate by software with programming cable.
Squelch 0-9 Level
9 level for you to choose,to reduce noise,protect our ears from noise.
1.4 Inch LED Screen
You can check the information like battery status,Channel number with the screen.
Long Service Life Lithium Battery
Long Standy time 30H
FRS and PMR License Free
You don’t have to apply a license for the radio,it is legal.
FRS FOR America & Canada ,and PMR for Europe.
Regions except Europe and the U.S., such as Asia, the Middle East, Australia, Africa, South America, etc., can also use these walkie-talkies. The legal frequency of each country is different.If you need to write frequency according to your country’s law,please buy the programming cable,and if you don’t know how to write frequency,please contact the customer service.
With the programming cable, you can reprogram your walkie-talkie through programming software.You can change the walkie-talkie frequency, set the privacy code,VOX function,Squelch level,etc.
Please choose the Package B/D if you want the programming cable.
The software may have some problems in the computer system language environment of different countries. When problems occur, please contact our customer service. We will solve them in time for you until you are satisfied.
Feedback from Buyers
Manual language(English, German, Italian, French, Spanish)
Notice:Any questions, please contact usFIRSTLY. we will try our best to solve your problem.
1:Does the radio set include the programming cable?
—-No.If you need it ,pls click this link:RB18/RB618Programming Cable.
2:How to activate the VOX Function?
The VOX hand free function only can be activated or deactivated by software with the programming cable.
3:Can i use the headset to achieve the VOX(voice activate transmission)?
—–Yes,you can speak directly to the headset microphone after you have opened the VOX function.
4:How about the talk range?
——Talk Range depend on many factors,like the RFpower,obstacles,weather,
battery power and so on.Usually RB18/RB618 can reach 0-1.5 km in the city area,0-2.5Km in the village area.
5:I want to program the RB18/RB618 walkie-talkie,how can i get the software?
—–Please contact our customer service,she will send you the software.
6:How to lock channel ?
—–Long press the LAMP key,then the lock is on .You cannot change the channel when the lock is on.
7:How can I know the battery is full charged?
—–On the back side of the RB18/618,When the device was charging,the LED indicator turn red;and when the battery is full charged,the LED indicator turn green.
8:How to turn on the flashlight?
—–Power on the RB18, short press LAMP key to open the flashlight.
Short press LAMP key again to turn off the flashlight.
9:How to turn on the Scan function?
—-In the standby mode, press UP+DOWN to enter scan function, the green indicator light is blink quickly, the radio scans between the added channels. When a valid voice signal is scanned, it automatically stays in this state until the signal disappears. Press any key to exit scan mode.
10:How to choose the matching headset?
—-RB618/18 is compatible with 2Pin K plug accessories.
11:How to change the voice language?
—-Press PTT+DOWN to open the radio, changing the Chinese/English
12:The firmware of the Walkie Talkie flew when trying to program through the cable. Tell me, how to return to the original state?
—-Please contact the customer service,they will send you the Factory file for you to return.